Display Cpu; Display Device - 3Com 5500G-EI Command Reference Manual

Parameter
unit
Description
Use the
and the next boot.
Example
<SW5500>display boot-loader
The app to boot of board 0 at the next time is: flash:/platform.app
The app to boot of board 0 at this time is:
flash:/PLATV100R002B09D002.APP

display cpu

Syntax
display cpu [ unit
View
All views.
Parameter
unit
Description
Use the
Example
To display CPU occupancy, enter the following:
<SW5500>display cpu
The information displays in the following format:
CPU busy status:
18% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes
Table 54 Display information
Field
Board 0 CPU busy status
18% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes

display device

Syntax
display device [ unit
View
All views
: Specify the Unit ID of the switch.
unit-id
display boot-loader
unit-id
: Specify the Unit ID of the switch.
unit-id
command to display CPU occupancy.
display cpu
Description
The busy status of the Switch
The CPU occupancy rate is 18% at last 5 seconds
The CPU occupancy rate is 19% at last 1 minute
The CPU occupancy rate is 19% at last 5 minutes
unit-id
Device Management Commands
command to display APP file used for this boot
]
]
437