Mac-Address - 3Com 5500G-EI Command Reference Manual

The above information indicates that the dynamic entry in the MAC address table
is no-aging.

mac-address

Syntax
mac-address { static | dynamic | blackhole }
interface
undo mac-address [ { static | dynamic | blackhole }
interface {
vlan -
View
System view
Parameter
static:
dynamic:
blackhole
will be discarded.
mac-addr:
interface-type:
interface-num:
interface-name:
vlan-id:
Description
Use the
the
undo mac-address
If the input address has been existing in the address table, the original entry will be
modified. That is, replace the interface pointed by this address with the new
interface and the entry attribute with the new attribute (dynamic entry and static
entry).
All the (MAC unicast) addresses on a certain interface can be deleted. User can
choose to delete any of the following addresses: address learned by system
automatically, dynamic address configured by user, static address configured by
user.
For the related commands, see
Example
Configure the port number corresponding to the MAC address 00e0-fc01-0101 as
GigabitEthernet1/0/1 in the address table, and sets this entry as static entry.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
name interface
- |
interface name
-
id ]
Static table entry, lost after resetting switch.
Dynamic table entry, which will be aged.
: Blackhole table entry, the packet with this destination MAC address
Specify the MAC address.
Specify the interface type.
Specify the interface number.
Specify the interface name.
Specify the VLAN ID.
command to add/modify the MAC address table entry. Use
mac-address
command to delete MAC address table entry
MAC Address Table Management Commands
mac-address
type interface num
- -
interface type interface
| -
display mac-address
interface {
vlan id
} vlan -
mac address
-
num
- ] vlan
.
433