Ospf Timer Poll; Ospf Timer Retransmit - 3Com 5500G-EI Command Reference Manual

212 C 6: U R
HAPTER SING

ospf timer poll

ospf timer retransmit

P C
OUTING ROTOCOL OMMANDS
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Vlan-interface 1
[SW5500-Vlan-interface1]ospf timer hello 20
Syntax
ospf timer poll
undo ospf timer poll
View
VLAN Interface view
Parameter
Enter the the poll Hello interval in seconds, in the range 1 to 65535. The
seconds
default value is 120 seconds.
Description
Using the
ospf timer poll
interval.
Using the
undo ospf timer poll
interval.
The Poll interval should be at least three times the Hello interval.
Example
To set the transmit poll Hello packet interval to 130 seconds for interface
Vlan-interface 2, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Vlan-interface 2
[SW5500-Vlan-interface2]ospf timer poll 130
Syntax
ospf timer retransmit
undo ospf timer retransmit
View
VLAN Interface view
Parameter
Enter the interval allowed before LSA re-transmission. This time is set for
interval
an interface, in seconds, in the range 1 to 65535. The default value is 5 seconds.
Description
Using the
ospf timer retransmit
before LSA re-transmission on an interface.
seconds
command, you can configure the Hello packet poll
command, you can restore the default poll
interval
command, you can configure the interval