Debugging Multicast Status-Forwarding; Display Multicast Forwarding-Table - 3Com 5500G-EI Command Reference Manual

debugging multicast
status-forwarding
display multicast
forwarding-table
Use the
undo debugging multicast kernel-routing
functions.
Example
Enable multicast kernel routing debugging functions.
<SW5500>debugging multicast kernel-routing
Syntax

debugging multicast status-forwarding

undo debugging multicast status-forwarding
View
User View
Parameter
None
Description
Use the
debugging multicast status-forwarding
forwarding status debugging functions.
Use the
undo debugging multicast status-forwarding
debugging functions.
Example
Enable multicast forwarding status debugging functions.
<SW5500>debugging multicast status-forwarding
Syntax

display multicast forwarding-table [

mask-length source-address
} ] |
incoming-interface {
View
Any View
Parameter
Multicast group address, used to specify a multicast group,
group-address
:
ranging from 224.0.0.0 to 239.255.255.255.
Unicast IP address of the multicast source.
source-address:
incoming-interface:
Register interface of PIM-SM.
register:
Description
Use the
display multicast forwarding-table
multicast forwarding table.
Multicast Common Configuration Commands
group-address
[ mask {
interface-type interface-number
Incoming interface of the multicast forwarding table.
to disable the debugging
to enable multicast
to disable the
[ mask {
mask | mask-length
| register }]*
to view the information of IP
243
mask |
} ] |