Terminal Debugging; Terminal Logging - 3Com 5500G-EI Command Reference Manual

472 C 12: U
HAPTER SING

terminal debugging

terminal logging

S M C
YSTEM ANAGEMENT OMMANDS
Parameter
None
Description
Use the
reset trapbuffer
Example
Clear information in trap buffer.
<SW5500>reset trapbuffer
Syntax
terminal debugging
undo terminal debugging
View
User view
Parameter
None
Description
Use the
terminal debugging
information on the terminal. Use the
configure not to display the debugging information on the terminal.
By default, the displaying function is disabled.
Related commands:
Example
Enable the terminal display debugging.
<SW5500>terminal debugging
Syntax
terminal logging
undo terminal logging
View
User view
Parameter
None
Description
Use the
terminal logging
on the terminal. Use the
log information display.
command to clear information in trap buffer.
command to configure to display the debugging
undo terminal debugging
debugging.
command to start logging the information displayed
undo terminal logging
command to
command to disable terminal