Display And Debug Qos - 3Com 7700 Configuration Manual

Hide thumbs Also See for 7700:
Table of Contents

Advertisement

Display and Debug QoS

Table 15 Configure Bandwidth Assurance
Operation
Cancel the configuration of
bandwidth assurance.
For more information about the commands, refer to the "3Com Command
Reference Guide".
Configure Traffic Statistics
The traffic statistics function counts the transmitted data that matches the ACL
rules. After the traffic statistics function is configured, you can use the display
qos-info traffic-statistic command to display the statistics information.
Perform the following configuration in Ethernet port view.
Table 16 Configure Traffic Statistics
Operation
Configure traffic statistics
Cancel the configuration of traffic
statistics
Display the statistics information
For details about the command, refer to the "3Com Command Reference Guide".
After you configure QoS, execute the display command in all views to display the
running of the QoS configuration, and to verify the effect of the configuration.
Execute the reset command in user view to clear the statistics of the QoS module.
Table 17 Display and Debug QoS
Operation
Display the parameter settings of
all the QoS actions
Display the queue scheduling mode
and parameter
Display the parameter settings of
rate limit
Display the settings of priority tag
Display the information about the
traffic
Display the information about the
bandwidth assurance
Display the information about the
RED operation
Display the settings of priority used
for putting the packet to the
sending queue
Command
undo traffic-bandwidth outbound { ip-group { acl-number
| acl-name } [ rule rule ] | link-group { acl-number | acl-name }
[ rule rule ] }
Command
traffic-statistic { inbound | outbound } { ip-group {
acl-number | acl-name } [ rule rule ] | link-group {
acl-number | acl-name } [ rule rule ] }
undo traffic-statistic { inbound | outbound } {
ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }
display qos-info traffic-statistic
Command
display qos-interface [ interface-name | interface-type
interface-num ] all
display qos-interface [ interface-name | interface-type
interface-num ] queue-scheduler
display qos-interface [ interface-name | interface-type
interface-num ] traffic-limit
display qos-interface [ interface-name | interface-type
interface-num ] traffic-priority
display qos-interface [ interface-name | interface-type
interface-num ] traffic-statistic
display qos-interface [ interface-name | interface-type
interface-num ] traffic-bandwidth
display qos-interface [ interface-name | interface-type
interface-num ] traffic-red
display priority-trust
QoS Overview
153

Advertisement

Table of Contents
loading

Table of Contents