Lacp System-Priority; Link-Aggregation Group Agg-Id Description - 3Com 5500G-EI Command Reference Manual

lacp system-priority

link-aggregation group
agg-id description
Description
Use the
lacp port priority
undo lacp port-priority
Related commands:
display link-aggregation verbose
link-aggregation interface
Example
To set port priority as 64, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Gigabitethernet 1/0/1
[SW5500-GigabitEthernet1/0/1]lacp port-priority 64
Syntax
lacp system-priority
undo lacp system-priority
View
System View
Parameter
system-priority-value:
is 32768.
Description
Use the
lacp system-priority
Use the
undo lacp system-priority
Related command:
display lacp system-id
Example
To set system priority as 64, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]lacp system-priority 64
Syntax
link-aggregation group
undo link-aggregation group agg-id description
View
System View
Parameter
Aggregation group ID, in the range of 1 to 464.
agg_id:
Ethernet Port Link Aggregation Commands
command to configure port priority value. Use the
command to restore the default value.
.
system-priority-value
System priority, ranging from 0 to 65535. By default, it
command to configure system priority value.
command to restore the default value.
.
agg_id description
and
display
alname
75