Voice Vlan Security - 3Com 5500G-EI Command Reference Manual

voice vlan security

By default, the Voice VLAN is in auto mode.
If required, the
voice vlan mode auto
commands must be executed before the Voice VLAN features are enabled globally.
For the related command, see
Example
To set the Voice VLAN in manual mode, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]undo voice vlan mode auto
Syntax
voice vlan security enable
undo voice vlan security enable
View
System View
Parameter
None
Description
Use the
voice vlan security enable
security mode. In this mode, the system can filter out the traffic whose source
MAC is not OUI when the traffic travels through the access port of IP Phone within
the Voice VLAN, while the other VLANs are not influenced. Use the
vlan security enable
By default, the Voice VLAN security mode is enabled.
For the related command, see
Example
To disable the Voice VLAN security mode, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]undo voice vlan security enable
Voice VLAN Configuration Commands
and
undo voice vlan mode auto
display voice vlan status
command to enable the Voice VLAN
command to disable the Voice VLAN security mode.
display voice vlan status
89
.
undo voice
.