Display Am - 3Com 5500G-EI Command Reference Manual

126 C 5: U N
HAPTER SING

display am

P C
ETWORK ROTOCOL OMMANDS
Use the
undo am trap enable
function.
By default, the access management trap is disabled.
Example
To enable the access management trap, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]am trap enable
Syntax
interface-list
display am [
View
Any view
Parameters
interface-list
specified port in the
to
[ { interface_type interface_num
format.
interface_name
interface_type interface_num
interface_type
indicates the preceding parameter can be input up to 10 times.
&<1-10>
Description
Use the
display am
and configuration of IP address pool.
Example
To display the access management configurations on Ethernet0/1.
<SW5500>display am Ethernet1/0/1
Ethernet1/0/1
Status
IP Pools
command to disable the access management trap
]
Enter to display the access management information of the
interface_type interface_num
{ {
Enter the port name, represented with
.
is the port type and
interface_num
command to view the status of access management function
: disabled
: (NULL)
interface_name
|
| interface_name } ] } &<1-10>
interface_name=
is the port number.
}