Cut Connection - 3Com 5500G-EI Command Reference Manual

360 C 11: U
HAPTER SING

cut connection

AAA RADIUS C
AND OMMANDS
access-limit
access the device using the current user name. The argument
in the range of 1 to 1024.
Specifies the IP address of a user.
ip:
mac mac-address
takes on the hexadecimal format of
Sets the VLAN attribute of user, in other words, the VLAN to which
vlanid
vlan :
a user belongs. The argument
Sets the port binding attribute of user.
location:
ip-address
nas-ip
remote port with a user. The argument
decimal format and defaults to 127.0.0.1.
port portnum :
represented by "SlotNumber SubSlotNumber PortNumber". If any of these three
items is absent, the value 0 will be used to replace it.
Description
Use the
attribute
Use the
undo attribute
defined for this local user.
It should be noted that the argument nas-ip must be defined for a user bound
with a remote port, which is unnecessary, however, in the event of a user bound
with a local port.
Related command:
Example
To configure the IP address 10.110.50.1 to the user JohnQ, enter the following:
<SW5500> system-view
System View: return to User View with Ctrl+Z.
[SW5500]local-user JohnQ
New local user added.
[SW5500-luser-JohnQ]ip 10.110.50.1
Syntax
cut connection { all | access-type { dot1x | gcm | mac-authentication
domain-name
} | domain
ip-address
ip
vlan vlanid | ucibindex
View
System View
Parameter
Configures to disconnect all connection.
all:
Specifies the maximum number of users who
max-user-number
:
Specifies the MAC address of a user. Where,
:
HHHH-HHHH-HHHH-HHHH
vlanid
The IP address of the access server in the event of binding a
:
Sets the port to which a user is bound. The argument
command to configure some attributes for specified local user.
command to cancel the attributes that have been
display local-user
| interface
mac-address
| mac
ucib-index
.
is an integer in the range of 1 to 4094.
is an IP address in dotted
ip-address
.
interface-type interface-number
radius-scheme-name
| radius-scheme
| user-name user-name
is
max-user-number
mac-address
is
portnum
|
|
}