Packet-Filter - 3Com 5500G-EI Command Reference Manual

Description
Use the
information.
Example
To display QoS profile configuration information, enter the following:
<SW5500> display qos-profile all
qos-profile: qos-profile student, 3 actions
packet-filter inbound link-group 4000 rule 1
traffic-limit inbound ip-group 2000 rule 1 128 exceed drop
traffic-priority inbound ip-group 2000 rule 1 local-precedence 0

packet-filter

Syntax
packet-filter inbound { ip-group
acl-number
undo packet-filter
link-group
rule
View
QoS Profile View
Parameter
inbound:
ip-group
to 3999
link-group
rule
match statements are selected if you skip this keyword.
Description
Use the
profile.
Use the
from the QoS profile.
Example
To add the qos-profile student to this packet filtering action: Filters the inbound
packets matching the ACL 4000, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]qos-profilestudent
[SW5500-qos-profilestudent]packet-filter inbound link-group 4000
[SW5500-qos-profilestudent]
display qos-profile
rule
rule ] ] | link-group
inbound
acl-number rule
] }
Filters the inbound packets on the port.
Basic or advanced ACL,
acl-number
:
Layer 2 ACL,
acl-number :
Specifies a match statement in the ACL, in the range 0 to 65534. All
rule
:
command to add packet filtering action to the QoS
packet-filter
undo packet-filter
QoS Profile Configuration Commands
command to view QoS profile configuration
acl-number
acl-number
acl-number
{ ip-group
rule ] ] | link-group
acl-number
acl-number
command, you can remove packet filtering action
rule
[ rule [ link-group
rule
[ rule ] }
rule
[ rule
acl-number [ rule
is in the range 2000
is in the range 4000 to 4999
307
[