Link-Aggregation Group Agg-Id Mode - 3Com 5500G-EI Command Reference Manual

76 C 2: U P
HAPTER SING
link-aggregation group
agg-id mode
C
ORT OMMANDS
Aggregation group name, character string with 1 to 32 characters.
alname:
Description
Use the
link-aggregation group
descriptor for an aggregation group. Use the
agg-id description
Related command:
Example
To configure myal1 as the descriptor of aggregation group 22, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]link-aggregation group 22 description myal1
[SW5500]
Syntax
link-aggregation group
undo link-aggregation group
View
System View
Parameter
Aggregation group ID, in the range of 1 to 464.
agg_id:
Manual aggregation group.
manual:
Static aggregation group.
static:
Description
Use the
link-aggregation group
static aggregation group. Use the
delete an aggregation group.
A manual or static aggregation group can have up to eight ports. You can use the
l
ink-aggregation group
aggregation group into a manual or static one. If the port number in a group
exceeds eight, this operation fails and the system prompts you about the
configuration failure.
Related command:
Example
To create manual aggregation group 22, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]link-aggregation group 22 mode manual
agg_id
command to delete aggregation group descriptor.
display link-aggregation verbose
agg_id
mode { manual | static }
agg_id
agg_id
undo link-aggregation group
command to change an existing dynamic
agg-id
mode
display link-aggregation summary
command to configure
description
undo link-aggregation group
.
command to create a manual or
mode
.
command to