Save - 3Com 5500G-EI Command Reference Manual

Parameter
None
Description
Use the
reset saved-configuration
the flash memory of the Switch.
Consult with technical support personnel before executing this command.
Generally, this command is used in the following situations:
After upgrade of software, configuration files in flash memory may not match
■
the new version's software. Perform
to erase the old configuration files.
When a Switch 5500G-EI is reused on a network but in a different manner to
■
previously, the original configuration file should be erased and the switch
reconfigured.
If the configuration files do not exist in the flash memory when the Switch is
powered on and initialized, it will choose the default
Related commands:
saved-configuration
Example
Erase the configuration files from the flash memory of the Switch.
<SW5500>reset saved-configuration
This will delete the configuration in the flash memory.
The switch configurations will be erased to reconfigure.
Are you sure?[Y/N]

save

Syntax
filename
save [
View
Any view
Parameter
: the name of the configuration file. It is a character string of 5 to 56
file-name
characters.
: save the configuration file in safely mode.
safely
Description
Use the command, to save the current configuration files to flash memory.
save
After finishing a group of configurations and achieving corresponding functions,
get the current configuration files stored in the flash memory.
After a fabric is formed, if you execute the save command, all of the switches in
the fabric save the current configuration to the configuration files.
Configuration File Management Commands
command to erase configuration files from
reset saved-configuration
,
save display current-configuration
.
| safely ]
command
setting.
,
display
415