Display Dhcp Client; Ip Address Dhcp-Alloc - 3Com 5500G-EI Command Reference Manual

display dhcp client

ip address dhcp-alloc

Parameter
None
Description
Use the
debugging dhcp xrn xha
debugging.
Use the
undo debugging dhcp xrn xha
backup debugging.
By default, DHCP client hot backup debugging is disabled.
Example
To enable DHCP client hot backup debugging, enter the following:
<SW5500>debugging dhcp xrn xha
Syntax
display dhcp client [ verbose ]
View
Any view
Parameter
Enter to display detailed information about address allocation at DHCP
verbose
client.
Description
Use the
display dhcp client
address allocation at DHCP client.
Example
To display detailed information about address allocation at DHCP client, enter the
following:
<SW5500>display dhcp client verbose
DHCP client statistic information:
Vlan-interface1:
Current machine state: BOUND
Alloced IP: 169.254.0.2 255.255.0.0
Alloced lease: 86400 seconds, T1: 43200 seconds, T2: 75600 seconds
Lease from 2002.09.20 01:05:03
Server IP: 169.254.0.1
Transaction ID = 0x3d8a7431
Default router: 2.2.2.2
DNS server: 1.1.1.1
Domain name: 3Com.com
Client ID: 3com-00e0.fc0a.c3ef-Ethernet0/0
Next timeout will happen after 0 days 11 hours 56 minutes 1 seconds.
Syntax
ip address dhcp-alloc
DHCP Client Configuration Commands
command to enable DHCP client hot backup
command to disable DHCP client hot
command to view detailed information about
to 2002.09.21 01:05:03
117