Display Port; Display Unit - 3Com 5500G-EI Command Reference Manual

54 C 2: U P
HAPTER SING ORT

display port

display unit

C
OMMANDS
Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link
Table 7 Output Description of the Display Loopback-detection Command
Field
Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link
Syntax
display port { hybrid | trunk }
View
All views
Parameter
Enter to display the hybrid ports.
hybrid:
Enter to display the trunked ports.
trunk:
Description
Use the
display port hybrid
hybrid. Use the
display port trunk
is trunk.
Example
To display the currently configured hybrid ports, enter the following:
<SW5500>display port hybrid
The details display in the following format:
The following hybrid ports exist:
GigabitEthernet1/0/1
This example indicates that the current configuration has two hybrid ports,
GigabitEthernet1/0/1 and GigabitEthernet1/0/2.
Syntax
display unit unit-id
View
Any view
Parameter
Specifies Unit ID, ranging from 1 to 8.
unit-id:
Description
The Loopback-detection is enabled
The detection interval is 30 seconds
No port is in the loopback state
command to view the ports whose link type is
command to view the ports whose link type
GibabitEthernet1/0/2
interface