Ntp-Service Max-Dynamic Sessions; Ntp-Service Multicast-Client - 3Com 5500G-EI Command Reference Manual

ntp-service
max-dynamic sessions
ntp-service
multicast-client
Designate an interface on the local equipment to broadcast NTP packets. The local
equipment runs in broadcast-server mode and regularly broadcasts packets to its
clients.
Example
Configure to broadcast NTP packets via Vlan-Interface1 and encrypt them with
Key 4 and set the NTP version number as 3.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface vlan-interface1
[SW5500-Vlan-Interface1]ntp-service broadcast-server
authentication-key 4 version 3
Syntax
ntp-service max-dynamic-sessions
undo ntp-service max-dynamic-sessions
View
System view
Parameter
: The maximum sessions can be created locally, ranging from 0 to 100.
number
Description
Use the
ntp-service max-dynamic-sessions
sessions can be created locally. Use the
max-dynamic-sessions
number
By default, a local device allows up to 100 sessions.
Example
Set the local equipment to allow up to 50 sessions.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]ntp-service max-dynamic-sessions 50
Syntax

ntp-service multicast-client [

undo ntp-service multicast-client [
View
VLAN interface view
Parameter
: Specify a multicast IP address of Class D.
ip-address
number
undo ntp-service
command to resume the default maximum session
ip-address
ip-address
NTP Configuration Commands
command to set how many
]
]
507