Traffic-Limit - 3Com 5500G-EI Command Reference Manual

Version 3.1.x
Hide thumbs Also See for 5500G-EI:
Table of Contents

Advertisement

Parameters
inbound
ip-group
acl-number
link-group
of ACL, ranging from 4000 to 4999.
rule
rule
specified, all subitems of the ACL will be activated. If only an IP ACL or a Layer 2
ACL is activated, this parameter can be omitted. If both IP and Layer 2 ACLs are
activated at the same time, the
Description
Use the
information.
This command is used for clearing the statistics information about all the traffic or
a specified one.
Figure 1 Comparison of Statistics Information reset Commands
Commnad
reset acl
counter
reset
traffic-statist
ic
Example
Clear the statistics information about ACL 2000.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]interface gigabitethernet 1/0/1
[SW5500-GigabitEthernet1/0/1]reset traffic-statistic inbound
ip-group 2000

traffic-limit

traffic-limit inbound { ip-group
acl-number
target-rate
undo traffic-limit inbound {
link-group
rule
] }
View
Ethernet Port View
: specify the traffic received by the Ethernet port.
: Activates IP ACLs, including basic and advanced ACLs.
acl-number
: Sequence number of ACL, ranging from 2000 to 3999.
: Activates Layer 2 ACLs.
acl-number
: Specifies the subitem of an active ACL, ranging from 0 to 65534; if not
reset traffic-statistic
Function
Reset the statistics information of the ACL which is used in the case of
filtering or classifying the data treated by the software of the Switch.
The case includes: ACL cited by route policy function, ACL used for
control logon user, etc.
Reset statistic information of traffic. This command is used in the case
of filtering or classifying the data transmitted by the hardware of the
Switch. Commonly, this command is used to reset the statistics
information of the traffic-statistic command.
rule
rule
]] | link-group
action
[ exceed
acl-number
rule
QoS Configuration Commands List
acl-number
parameter cannot be omitted.
rule
command to reset the traffic statistics
acl-number
[ rule
acl-number
]
ip-group
acl-number
rule
] ] | link-group
301
: Sequence number
rule
[ link-group
rule
[ rule
] }
[ rule
rule
[
acl-number
[ rule

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstack 4 5500g-ei series

Table of Contents