Display Qos-Interface Mirrored-To; Display Qos-Interface Traffic-Limit - 3Com Switch 4500 Family Manual

<Sysname> display qos-interface Ethernet 1/0/1 line-rate
Ethernet1/0/1: line-rate
Inbound: 128 Kbps
Burst bucket size: 16 Kbyte
Refer to Table 1-3

display qos-interface mirrored-to

Syntax
display qos-interface { interface-type interface-number | unit-id } mirrored-to
View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which traffic mirroring
configuration is to be displayed.
unit-id: Unit ID of the switch for which traffic mirroring configuration is to be displayed. For the value
range for the unit-id argument, refer to
Description
Use the display qos-interface mirrored-to command to display the traffic mirroring configuration of a
port or a unit.
Related commands: mirrored-to.
Examples
# Display the traffic mirroring configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 mirrored-to
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 0
Mirrored to: monitor interface
Refer to Table 1-3

display qos-interface traffic-limit

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-limit
View
Any view
for the description on the output fields.
Table
running
for the description on the output fields.
1-2.
1-6