Display Radius Statistics - 3Com 5500G-EI Command Reference Manual

display radius statistics

SchemeName = default system
Primary Auth IP =127.0.0.1
Primary Acct IP =127.0.0.1
Second Auth IP =0.0.0.0
Second Acct IP =0.0.0.0
Auth Server Encryption Key= 3Com
Acct Server Encryption Key= 3Com
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min)
Username format
Data flow unit
Packet unit
unit 1 :
Primary Auth State=active,
Primary Acc State=active,
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Syntax
display radius statistics
View
All views
Parameter
None
Description
Use the
display radius statistics
of RADIUS packet.
This command outputs the statistics information about the RADIUS packets. The
displayed packet information can help with RADIUS diagnosis and
troubleshooting.
Related command:
radius scheme
Example
To display the statistics information of RADIUS packets, enter the following:
<SW5500>display radius statistics
state statistic(total=0):
DEAD=1048 AuthProc=0
AcctStart=0 RLTSend=0
AcctStop=0 OnLine=0
StateErr=0
Receive and Send packets statistic:
Send PKT total :0
RADIUS received packets statistic:
Code= 2,Num=0
Code= 3,Num=0
RADIUS Protocol Configuration Commands
Index=0
Port=1645
Port=1646
Port=1812
Port=1813
Second Auth State=block
Second Acc
command to view the statistics information
.
AuthSucc=0
RLTWait=0
Stop=0
Receive PKT total:0
,Err=0
,Err=0
Type=3Com
=5
=5
=without-domain
=Byte
=1
State=block
377