Frequency; Test-Type - 3Com 5500G-EI Command Reference Manual

View
HWPing Test Group View
Parameter
ip-address:
Description
Use the
test.
Use the
address.
By default, no destination IP address is configured for any test.
Example
Set the destination IP address in the test to 169.254.10.3
[SW5500-administrator-icmp]destination-ip 169.254.10.3

frequency

Syntax
frequency interval
undo frequency
View
HWPing Test Group View
Parameter
interval:
means no automatic test.
Description
Use the
Use the
The system automatically tests at intervals specified by this command, where the
argument
For the related command, see
Example
Set the automatic test interval to 10 seconds.
[SW5500-administrator-icmp]frequency 10

test-type

Syntax
test-type type
View
HWPing Test Group View
Destination IP address in a test
command to configure the destination IP address in the
destination-ip
undo destination-ip
Automatic test interval, in the range 0 to 65535. Default is 0 which
command to configure an automatic test interval.
frequency
command to disable an automatic test.
undo frequency
is greater than 0.
interval
command to delete the configured destination IP
.
count
HWPing Commands 455