Display Ospf Lsdb - 3Com 5500G-EI Command Reference Manual

Table 30 Output Description of the
Field
Cost
State
Type
Priority
Designated Router
Backup Designated
Router
Timers

display ospf lsdb

Syntax
display ospf [
network | nssa | router | summary ] [
ip
View
All Views
Parameters
process-id
is applied to all current OSPF processes if you do not specify a process ID.
area_id
brief
asbr
ase
network
nssa
router
summary
originate-router
self-originate
Description
Cost of the interface
State of the interface state machine
Network type of OSPF
Priority of DR for interface election
Designated router on the network in which the interface resides
Backup designated router on the network in which the interface resides
OSPF timers:
Hello — Interval of hello packets
■
Dead — Interval of dead neighbors
■
Poll — Interval of poll
■
Retransmit — Interval of retransmitting LSA
■
Transmit delay — Delay time of transmitting LSA
■
process-id
_ address | self-originate ]]
Enter the process ID of OSPF, ranging from 1 to 65535. The command
Enter the ID of the OSPF area, as either an ID number or an IP address.
Enter to view brief information.
Enter to view information about summary ASBR-LSA.
Enter to view information about AS-external-LSA.
Enter to view information about the Network LSA.
Enter to view information about the NSSA-external-LSA.
Enter to view information about the Router-LSA.
Enter to view information about Summary-Net-LSA.
Enter to view information about the LSA generator.
Enter to view information about self-originated LSA.
OSPF Configuration Commands
display ospf interface
area_id
] [ ] lsdb [ brief | [ asbr | ase |
ip_address
193
Command
] [ originate-router