Clock Summer-Time - 3Com 5500G-EI Command Reference Manual

clock summer-time

<SW5500>clock datetime 09:30:00 2004/01/01
Syntax
zone_name
clock summer-time
end_date offset_time
zone_name
clock summer-time
end-time end-date | start-time start-year start-month start-week
start-day end-time end-year end-month end-week end-day } offset-time
undo clock summer-time
View
User view
Parameters
: Enter the name of the summer time zone, up to 32 characters in
zone_name
length.
: Specifies that the summer time is set for the selected year.
one-off
: Specifies that the summer time is set for every year, starting from the
repeating
selected year.
: Enter the start time of summer time, in the format HH:MM:SS.
start_time
: Enter the start date of summer time, in the format YYYY/MM/DD.
start_date
: Enter the end time of summer time, in the format HH:MM:SS.
end_time
: Enter the end date of summer time, in the format YYYY/MM/DD.
end_date
: start year, ranging from 2000 to 2099.
start-year
: start month, the value can be the following :January, February,
start-month
March, April, May, June, July, August, September, October, November, December.
: start week, the value can be the following : first, second, third,
start-week
fourth, fifth, last.
: start day , the value can be the following : Sunday, Monday, Tuesday,
start-day
Wednesday, Thursday, Friday, Saturday.
r: end year, ranging from 2000 to 2099. The value must be same as start
end-yea
year.
: end month, the value can be the following :January, February, March,
end-month
April, May, June, July, August, September, October, November, December.
: end week, the value can be the following : first, second, third, fourth,
end-week
fifth, last.
: end day , the value can be the following : Sunday, Monday, Tuesday,
end-day
Wednesday, Thursday, Friday, Saturday.
Basic System Configuration and Management Commands
start_time start_date end_time
one-off
repeating
{ start-time start-date
443