Display Ospf Retrans-Queue - 3Com 5500G-EI Command Reference Manual

198 C 6: U R
HAPTER SING
display ospf
retrans-queue
P C
OUTING ROTOCOL OMMANDS
View
All Views
Parameter
: Enter the process ID of OSPF, ranging from 1 to 65535. The
process-id
command is applied to all current OSPF processes if you do not specify a process
ID.
Description
Use the
display ospf request-queue
OSPF request-queue.
Example
To display the information on the OSPF request-queue, enter the following:
<SW5500>display ospf request-queue
The information displays in the following format:
The Router's Neighbors is
RouterID: 1.1.1.1
Interface: 1.1.1.3
LSID: 1.1.1.3
Table 36 Output Description of the
Field
Router ID
Address
Interface
Area
LSID:1.1.1.3
AdvRouter
Sequence
Age
Syntax
display ospf [
View
All Views
Parameter
: Enter the process ID of OSPF, ranging from 1 to 65535. The
process-id
command is applied to all current OSPF processes if you do not specify a process
ID.
Description
Use the

display ospf retrans-queue

OSPF retransmission queue.
command to view information about the
Address:
Area:
AdvRouter:
display ospf request-queue
Description
Router ID of neighbor router
Address of the interface, through which neighbor routers communicate
with the router
Address of the interface on the network segment
Area number of OSPF
Link State ID of the LSA
Router ID of the router originating the LSA
Sequence number of the LSA, used to discover old and repeated LSAs
Age of the LSA
process-id
] retrans-queue
command to view information on the
1.1.1.1
0.0.0.0
1.1.1.3 Sequence:80000017 Age:35
Command