Display Radius - 3Com 5500G-EI Command Reference Manual

376 C 11: U
HAPTER SING

display radius

AAA RADIUS C
AND OMMANDS
Parameter
None
Description
Use the
display local-server statistics
local RADIUS authentication server.
Related command:
Example
To display the statistics of local RADIUS authentication server, enter the following
<SW5500>display local-server statistics
On Unit 1:
The localserver packet statistics:
Receive:
Discard:
Auth Receive:
Acct Receive:
On Unit 2:
The localserver packet statistics:
Receive:
Discard:
Auth Receive:
Acct Receive:
Syntax
display radius [
View
All views
Parameter
radius-scheme-name
not exceeding 32 characters. Display all RADIUS schemes when the parameter is
not set.
Description
Use the
display radius
RADIUS schemes or a specified one.
By default, this command outputs the configuration information about the
specified or all the RADIUS schemes. The output can help with RADIUS diagnosis
and troubleshooting.
Related command:
Example
To display the configuration information of all the RADIUS schemes, enter the
following.
<SW5500>display radius
------------------------------------------------------------------
.
local-server
30
0
10
20
0
0
0
0
radius-scheme-name
Specifies the RADIUS scheme name with a character string
:
command to view the configuration information of all
.
radius scheme
command to view the statistics of
Send:
Receive Packet Error:
Auth Send:
Acct Send:
Send:
Receive Packet Error:
Auth Send:
Acct Send:
]
30
0
10
20
0
0
0
0