3Com 5500G-EI Command Reference Manual page 412

412 C 12: U
HAPTER SING
S M C
YSTEM ANAGEMENT OMMANDS
configuration
The value of
configuration
acl-adv:
View the configuration information of OSPF.
ospf:
View the configuration information of sysname.
system:
timerange:
user-interface:
Filter the configuration information to be output via regular expression.
|:
Begin with the line that matches the regular expression.
begin:
Exclude lines that match the regular expression.
exclude:
Include lines that match the regular expression.
include:
regular-expression
Description
Use the
display current-configuration
configuration parameters of the switch.
By default, if some running configuration parameters are the same with the
default operational parameters, they will not be displayed.
If a user needs to authenticate whether the configurations are correct after
finishing a set of configuration, the
can be used to display the running parameters. Although the user has configured
some parameters, but the related functions are not effective, they are not
displayed.
When there is much configuration information to use the regular expression to
filter the output information. For specific rules about the regular expression, refer
to the Switch 5500G-EI Configuration manual.
Related commands:
saved-configuration
Example
To view the running configuration parameters of the switch, enter the following:
<SW5500>display current-configuration
To view the lines containing the character string "10*" in the configuration
information, enter the following. The "*" indicates that the "0" before it can
appear 0 times or multiple consecutive times.
<SW5500>display current-configuration | include 10*
To view configuration information beginning with "user", enter the following:
<SW5500>display current-configuration | include ^user
View specific parts of the current configuration.
configuration
:
is the key word of the configuration, such as:
View the configuration information of advanced ACL.
View the configuration information of time range.
View the configuration information of user-interface.
Define the regular expression.
:
display current-configuration
,
save reset saved-configuration
.
command to display the current
,
display
command