Display Stop-Accounting-Buffer - 3Com 5500G-EI Command Reference Manual

378 C 11: U
HAPTER SING
display
stop-accounting-buffer
AAA RADIUS C
AND OMMANDS
Code= 5,Num=0
Code=11,Num=0
Code=22,Num=0
Running statistic:
RADIUS received messages statistic:
Normal auth request
EAP auth request
Account request
Account off request
Leaving request
Syntax
display stop-accounting-buffer { radius-scheme
session-id
session-id
user-name
}
View
All views
Parameter
radius-scheme
accounting requests according to RADIUS server name.
specifies the RADIUS server name with a character string not exceeding 32
characters.
session-id
session-id
requests according to the session ID.
character string not exceeding 50 characters.
start-time stop-time
time-range
accounting requests according to the saving time.
time of the saving time range and
time range. The time is expressed in the format hh:mm:ss-yyyy/mm/dd. When this
parameter is specified, all the stopping accounting requests saved in the time
range since
start-time
user-name
user-name
requests according to the username.
character string not exceeding 32 characters,. The @ character can only be used
once in one username. The pure username (the part before @, namely the user ID)
cannot exceed 24 characters.
Description
Use the

display stop-accounting-buffer

accounting requests, which have not been responded and saved in the buffer.
After transmitting the stopping accounting requests, if there is no response from
the RADIUS server, the Switch will save the packet in the buffer and retransmit it
for several times, which is set through the
This command is used to display the stopping accounting requests saved in the
Switch buffer. You can select to display the packets sent to a certain RADIUS
,Err=0
,Err=0
,Err=0
,Num=0
,Num=0
,Num=0
,Num=0
,Num=0
| time-range
radius-scheme-name
:
Configures to display the saved stopping accounting
:
session-id
:
stop-time
to
stop-time
Configures to display the saved stopping accounting
:
User-name
,Err=0
,Err=0
,Err=0
,Err=0
,Err=0
radius-scheme-name
start-time stop-time
Configures to display the saved stopping
radius-scheme-name
specifies the session ID with a
Configures to display the saved stopping
Start-time
specifies the stop time of the saving
will be displayed.
specifies the username, a
command to view the stopping
retry realtime-accounting
,Succ=0
,Succ=0
,Succ=0
,Succ=0
,Succ=0
|
| user-name
specifies the start
.