Display Fib Statistics; Display Icmp Statistics - 3Com 5500G-EI Command Reference Manual

134 C 5: U N
HAPTER SING

display fib statistics

display icmp statistics

P C
ETWORK ROTOCOL OMMANDS
127.0.0.1/32
169.0.0.0/8
Syntax
display fib statistics [ | { begin | include | exclude }
View
Any View
Parameter
: Display the FIB entries from the first one containing the character string
begin
.
text
: Display only those FIB entries containing the character string
include
: Display only those FIB entries excluding the character string
exclude
: String of specific characters.
text
Description
Use the
display fib statistics
entries.
Example
To display the total number of FIB entries, enter the following:
<SW5500>display fib statistics
Route Entry Count : 30
Syntax
display icmp statistics
View
Any View
Parameter
None
Description
Use the
display icmp statistics
about ICMP packets.
Related commands:
Example
To view statistics about ICMP packets, enter the following:
<SW5500> display icmp statistics
Input: bad formats
echo
source quench 0
echo reply
127.0.0.1 U
2.1.1.1 SU
command to view the total number of FIB
command to view the statistics information
display ip interface reset ip statistics
0
5
10
t[0] InLoopBack0
t[0] Vlan-interface1
bad checksum
destination unreachable 0
redirects
parameter problem
text
]
.
text
.
text
.
0
0
0