3Com 5500G-EI Command Reference Manual page 315

Parameter
: V 1 security mode.
v1
: V 2 security mode.
v2c
: V 3 security mode.
v3
: The user name, ranging from 1 to 32 bytes.
user-name
: The corresponding group name of the user, ranging from 1 to 32
group-name
bytes.
authentication-mode
: Specifies the authentication protocol as HMAC-MD5-96.
md5
: Specifies the authentication protocol as HMAC-SHA-96.
sha
: Authentication password, character string, ranging from 1 to 64
auth-password
bytes.
: Specifies the security level as encryption.
privacy
: Specifies the DES encryption protocol.
des56
: Encryption password, character string, ranging from 1 to 64
priv-password
bytes.
: The number identifier of basic number-based ACLs, ranging
acl acl-number
from 2000 to 2999.
: Local entity user.
local
: Specifies the engine ID related to the user.
engineid
: Engine ID character string.
engineid-string
Description
Using the
snmp-agent usm-user
group, and reference the ACL to perform ACL control to the network
management users by acl acl-number. Using the
command, you can remove the user from the related SNMP group as well as the
configuration of the ACL control of the user.
Example
Add a user "John" to the SNMP group "Mygroup". Specify the security level to
"to be authenticated", the authentication protocol to HMAC-MD5-96 and the
authentication password to "hello", and reference the ACL 2002 to perform ACL
control to the network management users (basic ACL 2002 has already been
defined).
<SW5500>system-view
System View: return to User View with Ctrl+Z
Logon user's ACL Control Command
: Specifies the security level to "to be authenticated"
command, you can add a new user to an SNMP
undo snmp-agent usm-user
315