Rsa Peer-Public-Key; Ssh Server Authentication-Retries - 3Com 5500G-EI Command Reference Manual

520 C 12: U
HAPTER SING

rsa peer-public-key

ssh server
authentication-retries
S M C
YSTEM ANAGEMENT OMMANDS
Acknowledgement information will be promoted before the system clears all RSA
key pairs. This command is just a one-time instruction, so the result will not be
stored in the configuration file.
Related command:
Example
To remove all key pairs at the server, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rsa local-key-pair destroy
% The name for the keys which will be destroyed is SW5500_Host .
% Confirm to destroy these keys? [yes/no]:y
Syntax
rsa peer-public-key
View
System view
Parameter
Public key name
key-name :
Description
Use the
rsa peer-public-key
When using this command together with the public-key-code begin command to
configure the public key at the client, which is generated randomly by the client
program supporting SSH1.5.
Related commands:
Example
To enter the public key view, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rsa peer-public-key 3COM002
Syntax

ssh server authentication-retries

undo ssh server authentication-retries
View
System view
Parameter
Specifies authentication retry times, in the range of 1~5.
times
:
rsa local-key-pair create
key-name
command to enter the public key view.
public-key-code begin
times
.
,
public-key-code end
.