Secondary Authentication - 3Com 5500G-EI Command Reference Manual

Parameter
ip-address
second accounting server is at 0.0.0.0.
port-number
default, the accounting service is provided via UDP 1813.
Description
Use the
number for the second RADIUS accounting server. Use the
accounting
values.
For detailed information, read the Description of the
command.
Related commands:
Example
To set the IP address of the second accounting server of RADIUS scheme, 3Com, to
10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service, enter
the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]radius scheme 3Com
[SW5500-radius-3Com]secondary accounting 10.110.1.1 1813
secondary Syntax
authentication

secondary authentication

undo secondary authentication
View
RADIUS Scheme View
Parameter
ip-address:
second authentication/authorization is at 0.0.0.0.
port-number:
default, the authentication/authorization service is provided via UDP 1812
Description
Use the
port number for the second RADIUS authentication/authorization. Use the
secondary authentication
to default values.
For detailed information, read the Description of the
command.
Related commands:
IP address, in dotted decimal format. By default, the IP addresses of
:
Specifies the UDP port number, ranging from 1 to 65535. By
:
secondary accounting
command to restore the IP address and port number to default
,
key radius scheme
ip-address
IP address, in dotted decimal format. By default, the IP addresses of
Specifies the UDP port number, ranging from 1 to 65535. By
secondary authentication
command to restore the IP address and port number
,
key radius scheme
RADIUS Protocol Configuration Commands
command to configure the IP address and port
primary accounting
, .
state
[ port-number
command to configure the IP address and
primary authentication
, .
state
389
undo secondary
]
undo