Display Qos-Interface Traffic-Statistic; Display Queue-Scheduler - 3Com 5500G-EI Command Reference Manual

display queue-scheduler

Parameter
interface-name | interface-type interface-num:
Switch. For detailed information, refer to the
:: Unit ID of the Switch.
unit-id
Description
Use the

display qos-interface traffic-statistic

traffic statistics information. The information displayed includes the ACL
corresponding to the traffic to be counted and the number of packets counted.
Related command:
traffic-statistic
Example
Display the traffic statistics information.
<SW5500>display qos-interface gigabitethernet1/0/1 traffic-statistic
GigabitEthernet1/0/1: traffic-statistic
Inbound:
Matches: Acl 2000 rule 1 running
0 packet inprofile
0 packet outprofile
Syntax
display queue-scheduler
View
Any view
Parameter
None
Description
Use the
display queue-scheduler
and corresponding parameter configuration.
The default is Weighted Round Robin.
Related command:
queue-scheduler
Example
To display the queue scheduling mode, enter the following:
<SW5500> display queue-scheduler
Queue scheduling mode: weighted round robin
weight of queue 0: 1
weight of queue 1: 2
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 6
weight of queue 6: 7
weight of queue 7: 8
QoS Configuration Commands List
Specifies a port of the
command in this manual.
port
command to view the
.
command to view queue scheduling mode
.
295