Ssh Configuration Commands; Debugging Ssh Server; Display Rsa Local-Key-Pair Public - 3Com 5500G-EI Command Reference Manual

SSH Configuration
Commands

debugging ssh server

display rsa local-key-pair
public
System View: return to User View with Ctrl+Z.
[SW5500]ntp-service unicast-server 128.108.22.44 version 3
This section describes the SSH configuration commands available on your Switch
5500G-EI.
Syntax
debugging ssh server { all | vty
undo debugging ssh server { all | vty
View
User view
Parameter
All SSH channels
all:
Debugged SSH channels. Optional values depend on the VTY number and
index :
they are 0~4.
Description
Use the
debugging ssh server
defined in SSH1.5 protocol to the information center as debugging information
and debug a single user interface.
Use the
undo debugging ssh server
By default, debugging function is disabled.
Related commands:
ssh server authentication-retries
,
rekey-interval ssh server timeout
Example
To print debugging information in running SSH, enter the following:
<SW5500>debugging ssh server vty 0
00:23:20: SSH0: starting SSH control process
00:23:20: SSH0: sent protocol version id SSH-1.5-SW5500-1.25
00:23:20: SSH0: protocol version id is - SSH-1.5-1.2.26
00:23:20: SSH0: SSH_SMSG_PUBLIC_KEY msg
00:23:21: SSH0: SSH_CMSG_SESSION_KEY msg - length 112, type 0x03
00:23:21: SSH: RSA decrypt started
00:23:21: SSH: RSA decrypt finished
00:23:21: SSH: RSA decrypt started
00:23:21: SSH: RSA decrypt finished
Syntax

display rsa local-key-pair public

View
All views

SSH Configuration Commands

index
}
index
}
command to send the negotiation process
command to disable debugging function.
.
513
,
ssh server