Port Hybrid Pvid Vlan; Port Hybrid Vlan - 3Com 5500G-EI Command Reference Manual

62 C 2: U P
HAPTER SING ORT

port hybrid pvid vlan

port hybrid vlan

C
OMMANDS
System View: return to User View with Ctrl+Z.
[SW5500]interface Gigabitethernet 1/0/1
[SW5500-GigabitEthernet1/0/1]port access vlan 3
Syntax
port hybrid pvid vlan
undo port hybrid pvid
View
Ethernet Port View
Parameter
Enter a VLAN ID in the range 2 to 4094, as defined in IEEE 802.1Q. The
vlan_id:
default is 1.
Description
Use the
port hybrid pvid vlan
the hybrid port. Use the
VLAN ID of the hybrid port.
Hybrid port can be configured together with the isolate-user-vlan. But if the
default VLAN has set mapping in the isolate-user-vlan, the default VLAN ID cannot
be modified. If you want to modify it, cancel the mapping first.
The default VLAN ID of local hybrid port must be consistent with that of the peer
one, otherwise, the packets cannot be properly transmitted.
Related command:
Example
To configure the default VLAN of the hybrid port Ethernet1/0/1 to VLAN100, enter
the following.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Gigabitethernet 1/0/1
[SW5500-GigabitEthernet1/0/1]port hybrid pvid vlan 100
Syntax
port hybrid vlan
undo port hybrid vlan
View
Ethernet Port View
vlan_id
command to configure the default VLAN ID of
undo port hybrid pvid
port link-type.
vlan_id_list { tagged | untagged }
vlan_id_list
command to restore the default