Snmp-Agent Group - 3Com 5500G-EI Command Reference Manual

snmp-agent group

View
System view
Parameter
Indicate that MIB object can only be read.
read:
Indicate that MIB object can be read and written.
write:
Community name character string.
community-name:
MIB view name.
view-name:
set access control list for specified community.
acl-list
acl :
Description
Use the
snmp-agent community
enable access to SNMP. Use the
the settings of community access name.
Example
Configure community name as
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]snmp-agent community read guest
Configure community name as
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]snmp-agent community write mgr
Delete the community name
[SW5500]undo snmp-agent community comaccess
Syntax
snmp-agent group { v1 | v2c }
write-view write-view
undo snmp-agent group { v1 | v2c }
snmp-agent group v3
read-view read-view
notify-view ] [ acl
undo snmp-agent group v3
View
System view
Parameter
Enter a group name, up to 32 characters in length.
group-name:
Specifies that the packet is authenticated without encryption.
authentication:
SNMP Configuration Commands
command to set the community access name and
undo snmp-agent community
and with read-only access permission.
guest
and read-write access permission.
mgr
.
comaccess
group_name
] [ notify-view notify-view
group-name
group-name
[ authentication | privacy ] [
] [ write-view write-view
acl-list ]
group-name [ authentication | privacy ]
command to cancel
[ read-view read-view
] [ acl acl-list
] [ notify-view
481
] [
]