Display Link-Aggregation Summary; Display Link-Aggregation Verbose - 3Com 5500G-EI Command Reference Manual

display link-aggregation
summary
display link-aggregation
verbose
Description
Use the
debugging lacp state
debugging on a designated port or ports. Use the
command to disable LACP state machines debugging on a designated port or
ports.
Example
To enable all LACP state machines debugging.
<SW5500>debugging lacp state all
Syntax

display link-aggregation summary

View
Any view
Parameter
None
Description
Use the
display link-aggregation summary
information of all aggregation groups, including actor system ID, aggregation
group ID, aggregate group type, partner system ID, number of selected ports,
number of standby ports, load sharing type and master port number.
Example
To display summary information of all aggregation information, enter the
following:
<SW5500>display link-aggregation summary
Aggregation Group Type: D -- Dynamic, S -- Static, M -- Manual
Loadsharing Type: Shar – Loadsharing, NonS – Non-Loadsharing
Actor ID: 0x8000, 00e0-fcff-ff04
AL AL Partner ID
ID Type
-------------------------------------------------------------------
1 D 0x8000,00e0-fcff-ff01 1
10 M none
20 S 0x8000,00e0-fcff-ff01 1
Syntax

display link-aggregation verbose [

View
Any view
Parameter
Aggregation group ID, which must be a valid existing ID, in the range of
agg_id:
1 to 464.
Ethernet Port Link Aggregation Commands
command to enable LACP state machines
undo debugging lacp state
command to view summary
Select Standby Share
Ports Ports
0
1 0
0
agg_id ]
71
Master
Type Port
NonS Ethernet1/0/1
NonS Ethernet1/0/2
NonS Ethernet1/0/3