Reset Acl Counter; Rule - 3Com 5500G-EI Command Reference Manual

286 C 8: U Q
HAPTER SING

reset acl counter

rule

S/ACL C
O OMMANDS
System View: return to User View with Ctrl+Z
[SW5500]interface GigabitEthernet 1/0/1
[SW5500-GigabitEthernet1/0/1]packet-filter inbound ip-group 2000
Syntax
reset acl counter { all |
View
User View
Parameter
All ACLs.
all:
Specifies an ACL by its number, ranging from 2000 to 4999.
acl-number
:
Description
Use the
reset acl counters
zero.
Example
Clear the statistics information of ACL 2000.
<SW5500>reset acl counters 2000
Syntax
Define or delete the subrules of a basic ACL:
rule-id
rule [ ] { permit | deny }
} fragment | time-range
rule-id
undo rule
Define or delete the subrules of an advanced ACL:
rule [ rule-id
wildcard
| any } ] [ destination {
source-port operator port1
port1 [ port2 ] ] [ icmp-type
precedence
precedence
fragment | logging | time-range
rule-id
undo rule
destination-port | icmp-type | precedence | tos | dscp | fragment |
logging | time-range | vpn-instance ]*
Define or delete the subrules of a Layer 2 ACL:
rule-id
rule [
l
sap-type type-mask
lsap
source-vlan-id | source-mac-addr source-mac-wildcard
dest-mac-addr dest-mac-wildcard
rule-id
undo rule
acl-number
command to reset the ACL statistics information to
name
]*
[ source | fragment | time-range ]*
] { permit | deny }
[ port2
type code
tos
tos | dscp
name
[ source | destination | source-port |
] { permit | deny } [ [ type
format-type
] |
} | time-range
}
source-addr wildcard
[source {
protocol [ source {
dest-addr wildcard
] ] [ destination-port
] [ established ] [ [ {
dscp
}* | vpn-instance
]*
protocol-type type-mask
cos
| cos | source {
name
]*
| any
source-addr
| any } ] [
operator
instance
] |
|
}* | dest {