Static Route Configuration Command; Delete Static-Routes All; Ip Route-Static - 3Com 5500G-EI Command Reference Manual

Static Route
Configuration
Command

delete static-routes all

ip route-static

Table 21 Output Description of the
Hidden The number of hidden routes, that is routes not available at present but still
required. They can be hidden for future use.
This section describes the command you can use to configure a static route.
Syntax
delete static-routes all
View
System View
Parameter
None
Description
Use the
delete static-routes all
The system requests your confirmation before it deletes all the configured static
routes.
Related commands:
ip route-static
Example
Delete all the static routes in the router.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]delete static-routes all
Are you sure to delete all the static routes?[Y/N]
Syntax
ip_address
ip route-static
gateway_address
} [ preference
blackhole ]
undo ip route-static
interface_name | gateway_address
reject | blackhole ]
View
System view
Parameters
Enter the destination IP address in dotted decimal notation.
ip-address
Enter the IP subnet mask.
mask

Static Route Configuration Command

display ip routing-table verbose
command to delete all the static routes.
and
display ip routing-table
{ mask | mask-length } {
preference_value
ip-address { mask |
] [ preference
interface_name
] [ reject |
mask_length } [
preference_value
157
Command
.
|
] [