258
C
7: U
HAPTER
SING
igmp max-response-time
igmp robust-count
M
P
C
ULTICAST
ROTOCOL
OMMANDS
Report messages are received from any hosts within the defined period, the IGMP
Querier considers it a timeout and stops membership maintenance for the group.
This command only takes effect on an IGMP Querier running IGMP v2. For a
Querier running IGMP v1, this command cannot take effect because the IGMP
group members cannot send an IGMP Leave message when they leave a group.
Related command:
Example
Set the query interval on Vlan-interface10 as 3 seconds.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]interface Vlan-interface 10
[SW5500-Vlan-interface10]igmp lastmember-queryinterval 3
Syntax
igmp max-response-time
undo igmp max-response-time
View
VLAN Interface View
Parameter
Maximum response time in the IGMP query messages in seconds. Range
seconds
:
from 1 to 25. By default, the value is 10 seconds.
Description
Use the
igmp max-response-time
time contained in the IGMP query messages.
Use the
undo igmp max-response-time
The maximum query response time determines the period for a router to quickly
detect that there are no more directly connected group members in a LAN.
Related command:
Example
Set the maximum response time carried in host-query message to 8 seconds.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]interface Vlan-interface 10
[SW5500-vlan-interface10]igmp max-response-time 8
Syntax
igmp robust-count
undo igmp robust-count
and
igmp robust-count
seconds
command to configure the maximum response
command to restore the default value.
display igmp group
robust-value
display igmp interface
.