Self-Service-Url - 3Com 5500G-EI Command Reference Manual

You can use either the scheme or radius-scheme command to specify the RADIUS
scheme for an ISP domain. If both of these two commands are used, the latest
configuration will take effect.
Related command:
Example
To specify the current ISP domain, 3Com163.net, to use the RADIUS scheme
3Com, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]domain marlboro.net
[SW5500-isp-marlboro.net]scheme radius-scheme 3Com

self-service-url

Syntax
self-service-url enable
self-service-url disable
View
ISP Domain View
Parameter
url-string
the self-service server, a string with 1 to 64 characters. This string cannot contain
"?" character. If "?" is contained in the URL address, you must replace it with "|"
when inputting the URL address in the command line.
Description
Use the
URL.
Use the
By default, self-service server URL is not configured on the Switch.
This command must be incorporated with a RADIUS server (such as a CAMS
server) that supports self-service. Self-service means that users can manage their
accounts and card numbers by themselves. And a server with the self-service
software is called a self-service server.
Once this function is enabled on the Switch, users can locate the self-service server
and perform self-management through the following operations:
■
■
■
The "Change user password" option is available only after the user passed the
authentication; otherwise, this option is in grey and unavailable.
radius scheme
: The URL address of the page used to change the user password on
self-service-url enable
self-service-url disable
Select "Change user password" on the 802.1x client.
After the client opens the default explorer (IE or NetScape), locate the specified
URL page used to change the user password on the self-service server.
Change user password on this page.
AAA Configuration Commands
.
url-string
command to configure self-service server
command to remove the configuration.
371