Execute - 3Com 5500G-EI Command Reference Manual

Display information for directory flash:/test/
<SW5500>dir flash:/test/
Directory of unit1>flash:/test/
1 -rw- 248
20578304 bytes total (3104544 bytes free)
Display all of the files with names starting with "t" in directory flash:/test/
<SW5500>dir flash:/test/t*
Directory of unit1>flash:/test/t*
1 -rw- 248
20578304 bytes total (3104544 bytes free)
Display information about all of the files (including the deleted files) in directory
flash:/test/
<SW5500>dir /all flash:/test/
Directory of unit1>flash:/test/
1 -rw- 248
20578304 bytes total (3104544 bytes free)
Display information about all of the files (including the deleted files) with names
starting with "t" in
<SW5500>dir /all flash:/test/t*
Directory of unit1>flash:/test/t*
1 -rw- 248
20578304 bytes total (3104544 bytes free)

execute

Syntax
filename
execute
View
System view
Parameter
filename
:
length, with a suffix of ".bat".
Description
Use the
execute
The batch command executes the command lines in the batch file one by one.
There should be no invisible character in the batch file. If invisible characters are
found, the batch command will quit the current execution without back off
operation. The batch command does not guarantee the execution of each
command, nor does it perform hot backup itself. The forms and contents of the
commands are not restricted in the batch file.
Example
To execute the batch file "test.bat" in the directory of "flash:/", enter the
following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
Aug 29 2000 17:49:36 test.txt
Aug 29 2000 17:49:36 test.txt
Aug 29 2000 17:49:36 text.txt
flash:/test/
Aug 29 2000 17:49:36 text.txt
Name of the batch file, which is a string up from 1 to 256 characters in
command to execute the specified batch file.
File System Management Commands 405