Display Snmp-Agent Mib-View - 3Com 5500G-EI Command Reference Manual

476 C 12: U
HAPTER SING
display snmp-agent
mib-view
S M C
YSTEM ANAGEMENT OMMANDS
Syntax
display snmp-agent mib-view [ exclude | include | viewname
View
All views
Parameter
Display the SNMP mib view excluded.
exclude:
Display the SNMP mib view included.
include:
Display the SNMP mib view according to the mib view name.
viewname:
Specify the mib view name.
mib-view:
Description
The

display snmp-agent mib-view

configuration information of the Switch.
Example
Display the information about the currently configured MIB view.
<SW5500>display snmp-agent mib-view
View name:mv
Storage-type: nonVolatile
View name:test
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
View name:ViewDefault
Storage-type: nonVolatile
The following table describes the output fields.
Table 59 Output description of the display snmp-agent mib-view command
Field
View name
MIB Subtree
storage-type
included/excluded
active
If the SNMP Agent is disabled, "Snmp Agent disabled" will be displayed after you
execute the above
command is used to view the MIB view
MIB Subtree:internet
-included active
MIB Subtree:internet
-included active
MIB Subtree:internet
-included active
MIB Subtree:snmpUsmMIB
-excluded active
MIB Subtree:snmpVacmMIB
-excluded active
MIB Subtree:snmpModules.18
-excluded active
Description
View name
MIB subtree
Storage type
Permit or forbid access to a MIB object
Indicate the line state in the table
commands.
display
mib-view
]