Rmon Event - 3Com 5500G-EI Command Reference Manual

falling-threshold
2147483647.
event-entry2
from 0 to 65535.
owner
ranges from 1 to 127.
Description
Use the
rmon alarm
In this way, the alarm event can be triggered in the abnormal situations and then
decides to log and send trap to the NM station.
Example
Delete the information of entry 15 from the alarm table.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]undo rmon alarm 15

rmon event

Syntax
rmon event
trap-community
rmon-station
undo rmon event
View
System view
Parameter
event-entry
65535.
description
from 1 to 127.
Log event.
log:
trap:
trap-community:
trap message is sent to.
log-trap:
log-trapcommunity:
the trap message is sent to.
none:
threshold-value2
Event number corresponding to the falling threshold, ranging
:
Specifies the creator of the alarm. Length of the character string
text
:
command to add an entry to the alarm table. Use the
rmon alarm
command to delete an entry from this table.
event-entry [ description
| log-trap
]
event-entry
Number of the entry to be added/deleted, ranging from 1 to
:
Event description. Length of the character string ranges
string :
Trap event.
The community of the Network Management station that the
Log and trap event.
The community of the Network Management station that
neither log nor trap event.
RMON Configuration Commands
Falling threshold, ranging from 0 to
:
string ] { log | trap
log-trapcommunity | none } [ owner
497
undo