Shutdown - 3Com 5500G-EI Command Reference Manual

undo port
View
VLAN view
Parameter
interface_list
VLAN, expressed as
interface_name
}
&<1-10>
interface_type
and interface_name is the interface name. For their meanings and value range, see
the parameter of
must be larger than or equal to the port number before
&<1-10>
is the maximal.
Description
Using the
Using the
from a VLAN.
You can add/delete trunk port and hybrid ports to/from a VLAN by
commands in Ethernet Port View, but not in VLAN View.
port
For the related command, see
Example
Add Ethernet1/0/2 through Ethernet1/0/4 to VLAN 2.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]vlan2
[SW5500-vlan2]port ethernet1/0/2 to ethernet1/0/4

shutdown

Syntax
shutdown
undo shutdown
View
VLAN Interface View
Parameter
None
Description
Use the
shutdown
interface_list
: list of Ethernet ports to be added to or deleted from a certain
interface_list
} [
{
interface_type interface_num
to
.
is the interface type,
in this document. The interface number after keyword
Port
: Represents the repeatable times of parameters, 1 is the minimal and 10
command, you can add one port or one group of ports to a VLAN.
port
command, you can cancel one port or one group of ports
undo port
command to disable the VLAN interface. Use the
shutdown
command to enable the VLAN interface.
VLAN Configuration Commands
= {{
interface_type interface_num
interface_num
.
display vlan
83
|
|
interface_name
is the interface number
.
to
and
port undo
undo
} ]
to