Snmp-Agent Local-Engineid - 3Com 5500G-EI Command Reference Manual

482 C 12: U
HAPTER SING
snmp-agent
local-engineid
S M C
YSTEM ANAGEMENT OMMANDS
Specifies that the packet is authenticated and encrypted.
privacy:
Configures read-only view settings.
read-view:
Enter a read-only view name, up to 32 characters in length.
read-view
:
Configures read and write view settings.
write-view:
Enter a read and write view name, up to 32 characters in length.
write-view :
Configures notify view settings.
notify-view:
Enter a notify view name, up to 32 characters in length.
notify-view :
acl-list
acl :
Configures SNMP version 3.
v3:
Description
Use the
snmp-agent group
map an SNMP user to SNMP view.
Use the
undo snmp-agent group
3Com recommends that you do not use the
configuring an SNMP group, for the following reasons:
The
■ snmp-agent target-host
notify-view
Any change of the SNMP group
■
this group.
Example
Create an SNMP group named
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]snmp-agent group v3 guest
Syntax

snmp-agent local-engineid

undo snmp-agent local-engineid
View
System view
Parameter
local-engineid:
Specify the engine ID with a character string, only composed of
engineid:
hexadecimal numbers between 5 and 32 inclusive. The default value is "Enterprise
Number + device information".
Enter the access control list for this group name.
command to configure a new SNMP group, that is,
command to delete a specified SNMP group.
command automatically generates a
for a user, and adds it to the corresponding group.
notify-view
:
guest
engineid
Specify an engineID for the local SNMPv3 entity
parameter when
notify-view
will affect all the users related to