3Com 5500G-EI Command Reference Manual page 156

156 C 6: U R
HAPTER SING
P C
OUTING ROTOCOL OMMANDS
Parameter
None
Description
Use the
display ip routing-table verbose
routing table information.
The information displayed includes the route state, the verbose description of each
route and the statistics of the entire routing table.
All current routes, including inactive routes and invalid routes, are displayed.
Example
To display the verbose routing table information, enter the following:
<SW5500>display ip routing-table verbose
The information displays in the following format:
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
Protocol: #DIRECT
*NextHop: 1.1.1.1
1.1.1.1(Vlan-interface1)
State: <Int ActiveU Retain Unicast>
Age: 20:17:41
**Destination: 1.1.1.1
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42
**Destination: 2.2.2.0
Protocol: #DIRECT
*NextHop: 2.2.2.1
2.2.2.1(Vlan-interface2)
State: <Int ActiveU Retain Unicast>
Age: 20:08:05
The meaning of route state is defined in
described in Table
Table 21 Output Description of the
Descriptor Meaning
Holddown The number of holddown routes.
This refers to a route advertising policy that some distance vector routing
protocols (such as RIP) use to avoid expansion of error routes and to improve
the transmission speed and accuracy of unreachable routes. It usually
advertises a static route at an interval, regardless of the changes to dynamic
routes to the same
Delete The number of deleted routes.
Routes: 3
Delete: 62 Hidden: 0
Mask: 255.255.255.0
Preference: 0
Cost: 0/0
Mask: 255.255.255.255
Preference: 0
Cost: 0/0
Mask: 255.255.255.0
Preference: 0
Cost: 0/0
21.
display ip routing-table verbose
destination.
command to display the verbose
* = Next hop in use
Interface:
Interface: 127.0.0.1(InLoopBack0)
Interface:
Table 18. Other generated information is
For details, see the specific routing protocol.
Command