Debugging Pim Common; Debugging Pim Dm - 3Com 5500G-EI Command Reference Manual

266 C 7: U
HAPTER SING

debugging pim common

debugging pim dm

M P C
ULTICAST ROTOCOL OMMANDS
the source address and their server group addresses are subset of those in ACL,
can the be considered as matched.
Related commands:
Example
Configure C-RP filtering policy on the C-BSR routers, allowing only 1.1.1.1/32 as
C-RP and to serve only for the groups 225.1.0.0/16.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]multicast routing-enable
[SW5500]pim
[SW5500-pim]crp-policy 3000
[SW5500-pim]quit
[SW5500]acl number 3000
[SW5500-acl-adv-3000]rule 0 permit ip source 1.1.1.1 0 destination
225.1.0.0 0.0.255.255
Syntax
debugging pim common { all | event | packet | timer }
undo debugging pim common { all | event | packet | timer }
View
User View
Parameter
all the common debugging information of PIM.
all:
debugging information of common PIM event.
event:
debugging information of PIM hello packet.
packet:
debugging information of common PIM timer.
timer:
Description
Use the
debugging pim common
Use the
undo debugging pim common
By default, common PIM debugging functions are disabled.
Example
Enable all common PIM debugging functions.
<SW5500>debugging pim common all
Syntax
debugging pim dm { alert | all | mrt | timer | warning | { recv |
send } { all | assert | graft | graft-ack | join | prune } }
and
acl rule
to enable common PIM debugging functions.
to disable the debugging functions.