Display Debugging Ospf; Display Ospf Abr-Asbr - 3Com 5500G-EI Command Reference Manual

display debugging ospf

display ospf abr-asbr

The command cannot import the default route. When local router
import-route
is not configured with default route, the keyword
LSA to generate default route.
Related command:
import-route
Example
If a local route has no default route, the ASE LSA of the default route will be
generated.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf-1]default-route-advertise
The ASE LSA of the default route will be generated and advertised to OSPF route
area even if the local router has no default route.
[SW5500-ospf]default-route-advertise always
Syntax
display debugging ospf
View
Any View
Description
Use the
display debugging ospf
global OSPF and all processes.
For related commands, see
Example
To display the debugging states of global OSPF and all processes, enter the
following.
<SW5500>display debugging ospf
OSPF global debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
OSPF process 100 debugging state:
OSPF SPF debugging is on
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
Syntax
display ospf [ process-id
OSPF Configuration Commands
.
command to view the debugging states of
.
debugging ospf
] abr-asbr
should be used by ASE
always
185