Snmp-Agent Usm-User - 3Com 5500G-EI Command Reference Manual

314 C 8: U Q
HAPTER SING

snmp-agent usm-user

S/ACL C
O OMMANDS
V2c security mode.
v2c:
V3 security mode.
v3:
Group name, ranging from 1 to 32 bytes.
groupname
:
authentication:
system will authenticate but not encrypt SNMP data packets.
Authenticates and encrypts the packets.
privacy:
Sets read-only view.
read-view:
Read-only view name, ranging from 1 to 32 bytes.
read-view :
Sets read-write view.
write-view:
Read-write view name, ranging from 1 to 32 bytes.
write-view :
Sets notify view.
notify-view:
Notify view name, ranging from 1 to 32 bytes.
notify-view:
acl acl-number
from 2000 to 2999
Description
Using the
snmp-agent group
and reference the ACL to perform ACL control to the network management users
by
acl-number
acl
remove a specified SNMP group.
Example
Creates a new SNMP group: MyCompany, and reference the ACL 2001 to perform
ACL control to the network management users (basic ACL 2001 has already been
defined).
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]snmp-agent group v1 MyCompany acl 2001
Syntax
snmp-agent usm-user { v1 | v2c } u
acl-number
]
undo snmp-agent usm-user { v1 | v2c }
snmp-agent usm-user v3
auth-password
md5 | sha }
undo snmp-agent usm-user v3 u
engineid-string
View
System View
If this parameter is added to configuration command, the
the number identifier of basic number-based ACLs, ranging
:
command, you can configure a new SNMP group
. Using the
undo snmp-agent group
user-name group-name
] [ acl
ser-name group-name
}
command, you can
ser-name group-name
user-name group-name
[ authentication-mode {
acl-number
]
{ local | engineid
[ acl