Display Rmon Alarm; Display Rmon Event - 3Com 5500G-EI Command Reference Manual

display rmon alarm

display rmon event

Syntax
display rmon alarm [
View
All views
Parameter
alarm-table-entry
:
Description
Use the
display rmon alarm
For the related commands, see
Example
Display the RMON alarm information.
<SW5500>display rmon alarm
Alarm table 1 owned by 3COM is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1
<etherStatsOctets.1>
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Table 62 Output description of the display rmon alarm command
Field
Alarm table 1
3Com
VALID
Samples absolute value
Sampling interval
Rising threshold1
Falling threshold
startup
risingOrFallingAlarm
Syntax
display rmon event [
View
All views
alarm-table-entry
Alarm table entry index.
command to view RMON alarm information.
rmon alarm.
: 10(sec)
: 1000(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: 0
Description
Index 1 in the alarm table
Owner
The entry corresponding to the index is valid
Sampling the absolute value of the node
1.3.6.1.2.1.16.1.1.1.4.1
The interval of sampling the value
Rising threshold. When sampling value rises from
normal value to this threshold, rising threshold alarm
will be triggered.
Falling threshold. When sampling value decreases from
normal value to this threshold, falling threshold alarm
will be triggered.
The first trigger
The type of the first alarm: Specifies to alarm when
exceeding the rising threshold or the falling threshold
event-table-entry
RMON Configuration Commands
]
]
491