Ssh User Username Authentication-Type - 3Com 5500G-EI Command Reference Manual

ssh user username
authentication-type
Syntax
username
ssh user authentication-type { all | password | rsa }
username
undo ssh user
View
System view
Parameter
Valid local user name or user name defined by remote RADIUS system.
username
:
Specifies authentication type as password and RSA.
all:
Specifies authentication type as password.
password:
Specifies authentication type as RSA.
rsa:
Description
Use the

ssh user username authentication-type

authentication type for a designated user.
Use the
undo ssh user username authentication-type
the default mode in which logon fails.
By default, user can't logon the switch through SSH or TELNET, so you have to
specify authentication type for a new user. The new configuration takes effects at
the next logon.
Related commands:
display ssh user-information
Example
To specify jsmith's authentication type as password, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]ssh user jsmith authentication-type password
SSH Configuration Commands
authentication-type
command to define
command to restore
.
523